Multi-Mode cable has a little bit bigger diameter, with a common diameters in the 50-to-100 micron range for the light carry component (in the US the most common size is 62.5um). Single-mode optical fiber is an optical fiber in which only the lowest order bound mode can propagate at the wavelength of interest typically 1300 to 1320nm. The small core and single light-wave virtually eliminate any distortion that could result from overlapping light pulses, providing the least signal attenuation and the highest transmission speeds of any fiber cable type. Single-mode fiber has a much smaller core than multimode. Single-mode fiber gives you a higher transmission rate and up to 50 times more distance than multimode, but it also costs more. Single Modem fiber is used in many applications where data is sent at multi-frequency (WDM Wave-Division-Multiplexing) so only one cable is needed - (single-mode on one single fiber) Synonyms mono-mode optical fiber, single-mode fiber, single-mode optical waveguide, uni-mode fiber. Carries higher bandwidth than multimode fiber, but requires a light source with a narrow spectral width. Single Mode Fiber with a relatively narrow diameter, through which only one mode will propagate typically 1310 or 1550nm. Single Mode cable is a single strand (most applications use 2 fibers) of glass fiber with a diameter of 8.3 to 10 microns that has one mode of transmission. in a single mode connector the opening is 126 microns. 2nd the hole in the connector ferrel for the fiber. There are 2 major differences one color code.
0 Comments
Leave a Reply. |